Problem: On ECU VAG Simos PCR2.1 I accidentally wrote wrong file with foxflash over bench. And now I lost communication with it. I made backup of eeprom and flash. Now I just try every method to write again flash. I tried with ktag boot mode but have acces only to eeprom. And with Fox Flash… Read More »
Problem: Tried to read a BMW 2022 Getrag 7DCT300 ECU with Xhorse Multi Prog but failed. Multiprog says it does not support this boot version. Solution: This is a 2022 model. This boot version bc7g0301 is encrypted/locked. Multi prog cannot read it. Other tools like Hexprog, or Alientech KESS3 don’t read it either.
Question: For Dacia Duster with EMS3155 ecu, no problem to read write via flex full obd ? Here is the clue. Just read a normal obd protocol. For full obd, flex patch during ~45min Full obd, first time patch is long maybe 45 mins to 1hr but after that is quick Be careful if… Read More »
Problem: It’s a Ford S-Max with Delphi DCM35 ECU. MPPS, KESS and Foxflash all read ID. But they all have problem reading flash. Kess showing wrong security code. Foxflash showing error SilentKey. The car has before made stage1 by someone else its possible he protected it from reading now or its obd impossible this ECU?… Read More »
POWERSUPPLY INFO! Since this is asked quite a lot frequently when it comes with foxflash programmer so the post here is about this power supply issue. Why? Instability or undervoltage can cause programming interruptions, corrupted reads/writes, or worse — bricking the ecu (so dont underestimate this, you dont want extrabricked ecus because of your not… Read More »
Problem: Peugeot 508 1.5 Blue hdi 96 kw with MD1CS003 ECU. Performing adblue in progress need info: Allready have benched read full backup using Foxflash programmer. File alllready modifed by tuner. Before i write I need to know do i need to reset adblue? I am not able to do it because of DTC U010E… Read More »
VW Bosch MED9.5.10 ECU read and write with CG FC200 programmer successfully. Read ExtEEPROM ok Read RxtFlash ok Write eeprom ok Write flash ok. Online checksum by FC200. Require MPC5XXX adapter for MED9 ECUs.
Wrapping up the year with a long-awaited release! ZF 6HP TCUs, used in BMW E-Series (and Alpina) automatic gearboxes, are now supported with Normal Read (NR) via OBD using your AutoTuner Tool. Protocol status: This release is available as an Open BETA. It is immediately accessible to all users, as the protocol has proven to… Read More »
Problem: Tried to read and write 2006 Mercedes E-Class 350 w211 MED9.7 ECU with Autotuner programmer via OBD. I wrote the tuned file and got no crank no start. I can’t read ID or write back original now. Any help? Solution: SOLVED: unplug battery 10mins and I was able to write again. Issue- bad file.… Read More »
Question 1: I want to transfer XirDecoder chip tuning software license to new laptop, can you reset this license? Answer 1: There’s actually a license reset button within the program. It will reset the license connection. It can also be used on a new PC. Question 2: Can XRemover correct checksums on its own?… Read More »
With the upcoming update, XirDecoder chip tuning software is introducing several important improvements. Previously, users would only receive a warning on the tuning page indicating that a file was not original. With the new update, after a file is uploaded on the main page, a new report screen will be available where users can view… Read More »
Alientech KESS3 released new OBD protocol for Continental SID213 ECU. 2.12.2025 – UPGRADE 2.74 A new KESS3 release that introduces OBD reprogramming for Continental SID213 ECUs on the latest diesel commercial vehicles and pick-ups, equipped with 2.0 EcoBlue engines (from 2022 onwards). No ECU removal Direct access via the diagnostic port Faster, safer and… Read More »
Get ready to tune the best of Stuttgart directly via the diagnostic port! Autotuner is thrilled to announce the release of the complete Porsche SDI10.x family on your Tool. You can now work on Porsche Macan, Cayenne, and Panamera equipped with SDI10.1, SDI10.2, SDI10.3, and SDI10.4 ECUs. Method: These protocols are available in OBD Virtual… Read More »
FormulaFlash ECU TCU programmer software released to V1.0.9.0 on Dec. 18th, 2025. READ-WRITE PROTOCOL BYD BYD TB10 R5F72531 BOSCH BOSCH M7.9.7.1-ST10F275 ST10F275 Boot mode reading EEPROM+FLASH Chang’an CHANGAN VISTEON STC-113-ST10F273 ST10F273 DEPHI LANDWIND DELPHI X7 MT62.1 SPC5643 GWM DELPHI MT95.1(MASTER) TC367 CHERY DELPHI E3 MT62.1 SPC5643 GAC DELPHI MT92.1 TC265 NANJUN DELPHI MT62.1 SPC5643… Read More »
Foxflash success report today: Landrover Evoque 2017 via obd – Medc17.9 ECU. 15 min read, ignition off in programming mode. turned off the ignition during the read, on write ignition was on. 9 min write with ignition on. All working.
