Problem: Tried to read BMW E60 CAS3+ module with Xhorse Multi Prog, I keep receiving ID identification failed message. Any solution? Solution: BMW CAS3+ ID failed is usually wrong connection or no ignition wake up. Use adapter mode not direct and make sure all power and ground stable. Also check you selected correct cas3 plus (CAS3+)… Read More »
Confirmed! Xhorse Multi prog with GEN2 BCM2 adapter clone encrypted Audi BCM2!!! Audi A6 2016 – Encrypted BCM2 3635/0825. Read old BCM2 and write DFLASH and PFLASH to new BCM2. But before write have to “Erase Chip” manual. Multiprog software have default option “ERASE BEFORE PROGRAMMING”…but not work. Need manual erase chip.
Will Xhorse Multi Prog 1：1 clone VAG Bosch DQ381 TCU? VAG Bosch DQ381 TCU (part number 1034420266), MCU Renesas R5F72549R (SH725xx family), boot version bh1g0301. From the Multi-Prog (Xhorse) connection log in bench mode, I see: CPU type: SH725xx BOSCH part number: 1034420266 TCU type: TCU-2-x.x MCU: R5F72549R (72549) UID: E716113C / EF722549R Flash: 0x2800000x… Read More »
Q: Can i clone the VAG MED17.5 ECU 1:1? I have read the same ECU with Xhorse Multi Prog. Here is the clue. Not possible to 1:1 read and write to clone this ECU. Because there is OTP. To clone this ECU, you will need to transfer immo data from original to donor ECU. Read… Read More »
Problem: Tried to read a BMW 2022 Getrag 7DCT300 ECU with Xhorse Multi Prog but failed. Multiprog says it does not support this boot version. Solution: This is a 2022 model. This boot version bc7g0301 is encrypted/locked. Multi prog cannot read it. Other tools like Hexprog, or Alientech KESS3 don’t read it either.
Read and write the Maserati BCM/BSI module with Xhorse multi prog successfully. MASERATI BCM Type: Magneti Marelli BSI Processor: MC9S12DG256 unsecured Read mcu, eeprom and flash successfully on bench mode. vvdi prog will also read this BCM.
